SIRIUS 3RW5 Modbus TCP communication module
Manual, 03/2018, A5E43676481002A/RS-AA/001
103
Configuration is the systematic arrangement, setting, and networking of the individual
3RW5 soft starters within the device or network view.
This section refers to the configuration and parameterization of 3RW5 soft starters.
Data that is transferred from the 3RW5 soft starter and indicates the current operating status.
Industrial communication system that connects a large number of field devices such as
probes (sensors), final controlling elements, and drives (actuators) to a control device.
Identification and maintenance data.
Information stored in a module that helps you to check the plant configuration, to locate
hardware modifications in a plant, or to remedy faults in a plant. I&M data enable modules to
be uniquely identified online.
To enable a Modbus TCP device to be addressed as a node on Industrial Ethernet, this
Modbus TCP device requires an IP address that is unique within the network. The IP
address is made up of 4 decimal numbers with a range of values from 0 through 255. The
decimal numbers are separated by a decimal point.
The IP address is made up as follows:
● Address of the (sub)net
● Address of the station (host or network node)
To Next Page
Loading...
Need help?
General
