Mounting and dismantling
4.1 Mounting the 3RW5 communication module
SIRIUS 3RW5 Modbus TCP communication module
30 Manual, 03/2018, A5E43676481002A/RS-AA/001
Break out the cover of the slot
Requirements
● Sharp, robust knife or diagonal cutter
Risk of injury from sharp edges or burrs.
Make sure that there are no sharp-edged burrs on the connecting webs and the preset
breaking points after knocking out. If necessary, deburr these spots professionally to avoid
injury.
Hold the cover tight so that it does not fall into the interior.
Ensure that no further foreign matter can get into the slot.
To Next Page
Loading...
Need help?
General
