Mounting and dismantling
4.2 Removing the 3RW5 communication module
SIRIUS 3RW5 Modbus TCP communication module
Manual, 03/2018, A5E43676481002A/RS-AA/001
33
Removing the 3RW5 communication module
Requirements
● Removed bus connector (Page 37)
● Screwdriver PH1
● Slotted screwdriver with blade width 5.5 to 8 mm
Damage to property due to electrical voltage
Switch off the power to the 3RW5 soft starter before starting work (main and control supply
voltage).
Note
A magnetic screwdriver simplifies disassembly.
Ensure that no foreign matter can get into the slot.