Mounting and dismantling
4.2 Removing the 3RW5 communication module
SIRIUS 3RW5 Modbus TCP communication module
34 Manual, 03/2018, A5E43676481002A/RS-AA/001
1. Remove the fastening screws from 3RW5 communication module.
2. There is a small gap above the upper mounting hole on the 3RW5 communication
module between the 3RW5 communication module and the 3RW5 soft starter. Insert the
slotted screwdriver into this gap from above.
3. Turn the slotted screwdriver 90°. The turning movement lifts the 3RW5 communication
module slightly out of the slot of the 3RW5 soft starter.
4. Pull the 3RW5 communication module out of the slot of the 3RW5 soft starter with your
fingers.
You have removed the 3RW5 communication module and can now mount another
3RW5 communication module.
To Next Page
Loading...
