Configuring
6.3 Operation on failure of the bus connection to the controller
SIRIUS 3RW5 Modbus TCP communication module
46 Manual, 03/2018, A5E43676481002A/RS-AA/001
You can set the parameters in the following ways:
● SIRIUS Soft Starter ES (TIA Portal) via local interface on the 3RW5 HMI High Feature
● 3RW5 HMI High Feature
Menu: "Parameter > Soft Starter > Additional parameters > Operation with CPU / master"
You will find more information on operating the 3RW5 HMI High Feature in the Manual of
the 3RW5 soft starter.
● User program via the "Parameters" data table (Page 89)
To Next Page
Loading...
