Siemens SIWAREX FTC - Page 71

WEIGHING FUNCTIONS AND PARAMETERS
Name Type Address Default Range of Values / Meaning Reference
RS232- XON/XOFF for
printer
RS232- RTS/CTS for
printer
BYTE DBB043 1
0
0
Bit 0:
0: XON/XOFF transmission control OFF
1: XON/XOFF transmission control ON
Bit 1:
0: CTS/RTS transmission control OFF
1: CTS/RTS transmission control ON
Bit 2: reserved, must always be 0
Bit 3 – 7 unused
5.6.14
RS485 0
Log selection BYTE DBB044 0 0: no protocol
1: SIEBERT- Protocol S11
2: ASCII protocol
3: SIEBERT- Protocol S102 (6-position)
5.6.15
Decimal place for the
remote display
BYTE DBB045 0 0 to 4
Other definitions not permitted.
5.6.16
RS485-Baudrate BYTE DBB046 3 0 = 1200 Bit/sec.
1 = 2400 Bit/sec.
2 = 4800 Bit/s
3 = 9600 Bit/s
4 = 19200 Bit/s
Other definitions not permitted.
5.6.17
RS485-character parity
RS485- Data bits
RS485-Stop-Bits
BYTE DBB047 0
1
0
Bit 0:
0: even
1: odd
Bit 1:
0: 7 data bits
1: 8 data bits
Bit 2:
0: 1 stop bit
1: 2 stop bit
Bit 3 – 7 not used
5.6.18
Digital outputs 0
Definition of digital output
1
BYTE DBB048 0FFh Value range 00h – 3Fh
0...1Fh Bit-No. NAWI status flag
20h...3Fh Bit-No. Conti status flag
41h....Pulse output Integration Distribution mem.1
42h... Pulse output Integration Distribution mem.5
FFh output always inactive
5.6.19
Definition of the digital
output 2
BYTE DBB049 0FFh Value range 00h – 3Fh
0...1Fh Bit-No. NAWI status flag
20h...3Fh Bit-No. Conti status flag
FFh output always inactive
5.6.19
Definition of the digital
output 3
BYTE DBB050 0FFh Value range 00h – 3Fh
0...1Fh Bit-No. NAWI status flag
20h...3Fh Bit-No. Conti status flag
FFh output always inactive
5.6.19
Definition of the digital
output 4
BYTE DBB051 0FFh Value range 00h – 3Fh
0...1Fh Bit-No. NAWI status flag
20h...3Fh Bit-No. Conti status flag
FFh output always inactive
5.6.19
SIWAREX FTC
5-59