Communication   
11.25 DR 32 display of data and operator errors 
  SIWAREX WT241 
162  Manual, 05/2015, A5E36046748A 
Command cannot be executed since a 
similar command is already active 
Command not possible because no dy-
namic procedure is active. 
Permitted number range violated 
Specifications of string lengths not plausi-
ble 
Specification of date / time not plausible 
Assignment of digital inputs/outputs incor-
rect 
Command only possible in test field 
The calibration weights or calibration digits 
are not plausible 
Zeroing parameter not plausible 
Scale interval / rounding not plausible 
Filter parameter not plausible 
Parameter assignment of analog output 
not plausible 
MAC address cannot be changed 
Speed parameter or sensor parameter not 
plausible 
Selection of unit not plausible 
Modbus RTU error 
code (Page 163) 
Synchronous error code for communica-
tion at the Modbus RS485 interface 
Modbus Ethernet 
error code 
(Page 163) 
Synchronous error code for communica-
tion at the Modbus Ethernet interface 
SIWATOOL error 
code (Page 163) 
Synchronous error code for communica-
tion at the SIWATOOL interface 
Error code follow-
ing commands at 
digital input 
(Page 163) 
Synchronous error code caused by com-
mand at the DIs