Siemens SIWAREX WT241 - Scale Name; Code for Regulations

Communication
11.4 DR 3 Belt scale parameters
SIWAREX WT241
Manual, 05/2015, A5E36046748Aa 101
Variable
Note
Type
L
Rw
Default
Min.
Max.
Register
Software version for
HMI SecureDisplay
with verification ca-
pability
(Page 107)(available
soon)
HMI SecureDisplay ver-
sion
CHAR[12]
12
V1.05.0
2
1052
Minimum display
size in % of the HMI
SecureDisplay with
verification capability
(Page 107)
(available soon)
HMI SecureDisplay with
verification capability
USHORT
1058
Reserve
USHORT
1)
Parameter for calculation of calibration points
11.4.1 Scale name
You can select any name, but it may not exceed 12 characters. You can enter any
designation.
Note
If the jumper is closed to protect data with verification capability, the parameter can no longer
be changed.
11.4.2 Code for regulations
Trade scales requiring verification are subject to certain restrictions (available soon).
0 – no verification
1 – verification in accordance with OIML R50
2 – verification in accordance with NTEP Book 44
(approvals available soon).
Note
If the jumper is closed to protect data with verification capability, the parameter can no longer
be changed.