Siemens SIWAREX WT241 - 4 Application Planning; Functions

SIWAREX WT241
Manual, 05/2015, A5E36046748A 19
4 Application planning
4
4.1 Functions
The primary task of the electronic weighing system is the calculation of the current flow rate.
The SIWAREX WT241 is calibrated at the factory. This allows for automatic
calibration of the scales without the need for calibration weights and
replacement of modules without the need for recalibrating the scales.
Further the SIWAREX WT241 can be connected to any control system or to
a PC by using the Modbus RTU protocol.