Siemens SIWAREX WT241 - Page 27

Connecting
6.2 Connecting to main voltage
SIWAREX WT241
Manual, 05/2015, A5E36046748A 27
Connect the mains voltage to the premounted power supply unit in the device. Use clamps
no. 1, 2 and 3 for connecting the mains voltage.
Figure 6-4 SIWAREX WT241 power supply
Marking
Type
Function
1
Input
Clamp for 100 ~ 240 VAC; 50
/ 60Hz – L
2
Input
Clamp for neutral wire
3
Input
Clamp for PE
4
Output
24V ground
5
Output
+24V