3 System Controls
[ 1 ] I N S T R U C T I O N S F O R U S E 3 - 45
Frame Recall (CINE) LCD Selections
You can access the Frame Recall (CINE) LCD selections by rotating the
FUNCTION SELECT control on the LCD panel to highlight the CINE tab on
the LCD. Frame Recall selections are available only after CINE frames have
been stored to disk using the DIGITAL STORE key. You can then activate
the Frame Recall function by selecting |
Frame Recall on the CINE LCD.
Use the system presets to select CINE storage as the destination associated
with the DIGITAL STORE key.
LCD Selection Description
|Copy to MO
Stores the currently displayed image or the image selected in the catalog to the
magneto-optical disk (MO).
|Delete All Frames
Deletes all images in the internal memory.
In the Catalog function, this key deletes the currently displayed image.
|Delete Frame
Deletes the displayed image.
In the Catalog function, this key deletes the selected image.
|Total Frame
Indicates total number of stored frames available for review.
|Auto Recall
Continuously recalls images in the internal memory.
In the Catalog function, this key continuously recalls selected images or all images
(if none are selected).
|Catalog
|Next Page
Displays thumbnails of the images in internal memory.
In the Catalog function, this key displays the next available page.
|Next Frame
|Previous Page
Recalls the next frame of the currently displayed image.
In the Catalog function, this key displays the previous page.
|Previous Frame
|Frame Recall
Recalls the previous frame of the currently displayed image.
In the Catalog function, this key recalls the selected image.
To Next Page
Loading...
