Siemens SONOLINE G50 - Imaging Functions that Change Acoustic Output

2 S a f e t y a n d Care
2 - 12 [ 1 ] I N S T R U C T I O N S F O R U S E
Imaging Functions that Change Acoustic Output
WARNING: Observe the real-time display of mechanical and thermal indices
(MI/TI) at all times.
In addition to the adjustment of the transmit power, adjustment of the
following imaging functions and/or controls may affect the acoustic output:
 Automatic Time-out
 |
Temporal Color LCD selection
 Color ROI Position and Size; Steering Angle for linear array transducers
 Doppler Gate Position; Steering Angle for linear array transducers
 Doppler PRF
 Color PRF
 Exam Type
 Field of View (Scan Angle); 2D Steering Angle for linear array
transducers
 Focus
 Frame Rate (|Res/Spd 2D-mode LCD selection)
 Freeze
 Image Depth
 Imaging Mode
 |
Density LCD selection in 2D, Color, and Power modes
 Multi-Frequency
 Power On/Off
 System Presets and QuickSets
 THI (using MULTIHERTZ control)
 Triplex/Update
 Transducer
 Gel Pad Use