5 B e g inning a n E x a m in a t io n
5 - 14 [ 1 ] I N S T R U C T I O N S F O R U S E
Editing Patient Data
You can edit entries on the Patient Data form at any time during the
patient examination.
Note: The ID LIST button located on the New Patient Data form is not available on the
Patient Data form. All other fields are identical for the two forms.
To display the Patient Data form:
1. Press the F3 function key on the keyboard or the PATIENT DATA key
on the control panel.
The system displays the Patient Data form.
2. Use the keyboard to update your entries.
Changes to the Patient Data form are also updated on the image
screen and in the report for exams with a patient report.
Changes to fields used in calculations cause the system to update
previously measured results.
3. Roll the trackball to the OK button and then press the SET key to save
the revisions to the patient information and redisplay the image screen.
To restore the current Patient Data form and redisplay the image
screen without saving the revisions, roll the trackball to the
Cancel button and then press the SET key.
To Next Page
Loading...
