3 System Controls
3 - 32 [ 1 ] I N S T R U C T I O N S F O R U S E
LCD and LCD Keys
The LCD lists options and functions for image optimization, transducer
selection, measurements, image annotation, biopsy and puncture
guidelines, CINE, image review, image storage, and tabs for the active
mode(s) and functions.
Selections are arranged as eight cells on the LCD, in two columns of four
rows each. Each cell contains one or two options, or a single function with
its current setting highlighted.
Each of the eight cells on the LCD has a corresponding key that is used to
select options and adjust settings.
Tabs along the bottom of the LCD identify currently active modes and
functions. A highlighted tab identifies LCD selections currently displayed.
LCD Keys
Press one of these eight keys to select the adjacent item in the LCD and to
highlight the setting for the item. If the LCD contains two items (such as
during the Annotation function), press the LCD key to toggle the selections.
To Next Page
Loading...
