3 S ystem C ontrols
3 - 54 [ 1 ] I N S T R U C T I O N S F O R U S E
Selections Used in the
Stress Echo Feature
When you use the Stress Echo feature, you use selections from several
windows, dialog boxes, and screens.
Select Protocol to Load Dialog Box
The Select Protocol to load dialog box lists all the available protocols.
The default list includes the following protocols:
Dobutamine Stress Echo
Ergometric Stress Echo
Treadmill
Ergometric continuous
1
Treadmill continuous
1
Protocol Window
Continuous stages, unlike non-continuous stages, do not display views in
the Protocol window. The system responds as follows for non-continuous
stages. (Phases are stages.) The Protocol window lists the phases and
views of the selected protocol. At the beginning of acquisition, the system
expands the first phase to list its constituent views; all other phases are
contracted. The system expands the next phase in the sequence once
images have been acquired for each view in the current phase. When the
last phase is completed, the system activates Stop for your selection.
Stress Echo Screen
Selections used in the Stress Echo screen include toolbar buttons and the
buttons available during each Stress Echo mode.
1
Requires software version 2.0 or higher
To Next Page
Loading...
