Siemens SONOLINE G50 - Operating Modes; Single Modes

6 T e chnical Description
6 - 6 [ 1 ] I N S T R U C T I O N S F O R U S E
Operating Modes
The following modes are available on the system:
Single Modes
 2D-mode, Dual mode, 4B-mode
1
, and Split (B+B) mode in fundamental
and harmonics
 M-mode
 A-mode
 Color Doppler
 Power and Directional Power Doppler
 Pulsed Wave Doppler
 Steerable Continuous Wave Doppler
2
 Continuous Wave Doppler (non-steerable)
3
Mixed Modes
 2D/M-mode
 2D/Doppler
 M/Doppler
 2D/M-mode with Doppler
 2D-mode with color (2D-mode with power)
 Dual-mode with color (Dual-mode with power)
 4B-mode with color (4B-mode with power)
 Split-mode with color (Split-mode with power)
 2D-mode with color/Doppler (update and triplex)
 2D-mode with color/M-mode with color/Doppler
 M-mode with color
 M-mode with color/Doppler
1
Requires software version 1.2 or higher
2
Available with the SONOLINE G60 S system; requires the Cardiac Imaging option for the
SONOLINE G50 system
3
Available for the SONOLINE G60 S system only
[1] Instructions for Use
Color formats 6-9