5 B e g inning a n E x a m in a t io n
[ 1 ] I N S T R U C T I O N S F O R U S E 5 - 1 7
Activating a Transducer
Although multiple transducers can be connected to the ultrasound system,
only one transducer can be active. Use the TRANSDUCER key on the
control panel to view an LCD listing of transducers currently connected to
the system.
The names of the transducers display on the LCD, with the active
transducer highlighted.
Biopsy
P4-2
7.5L70
EV9-4
Reset to Default
The example above indicates that three transducers are connected
to the system and the active transducer is the P4-2.
To activate a transducer connected to the system:
1. Press the TRANSDUCER key located on the control panel.
The system displays the names of the available transducers and options
on the LCD.
Use the system presets to select the transducer port that will be active
at system power-on.
2. Press the LCD key corresponding to the required transducer.
The system highlights the name of the selected transducer on the LCD
and activates your selection.
System Reference
System Presets Ch 3
F4
Boot Up
Ź Transducer Port Active
On Boot Up
To Next Page
Loading...
