Siemens SONOLINE G50 - Video I;O; Vcr; Review

3 System Controls
3 - 22 [ 1 ] I N S T R U C T I O N S F O R U S E
Video I/O
Displays a video signal that originates from an outside source, such as a
VCR, on the system monitor. If a VCR is the outside source, pressing
VIDEO I/O causes the system to display selections for controlling the VCR
on the LCD.
Use the system presets to select the Multi option for Video Input Source
to enable the VIDEO I/O key to toggle the two video input sources.
VCR
Toggles the record function with the pause or stop function if the VCR is on
and a tape is inserted. Refer to the system presets to configure this control
for either a record/pause function or a record/stop function. Refer to the
LCD for VCR control functions.
Review
Accesses the DIMAQ-IP feature to play back clips and view images and
reports, either during a patient examination or from saved studies.
Note: With the DIMAQ-IP feature, you can also save clips, images, reports, and patient
data to the system's hard disk or to compact disk (CD) and you can manage the
saved studies.
If the DICOM-IP feature is not installed on the system, the REVIEW key
directly accesses the disk utilities screen. Disk Utilities allow you to recall an
image, recall a report, or manage content of the disk (for example, delete
files and copy files.)
Video I/O
VCR
Review
System Reference
Disk Utilities Ch 4
VCR Ch 4
DIMAQ-IP Ch 5