3 System Controls
3 - 36 [ 1 ] I N S T R U C T I O N S F O R U S E
Transmit Power LCD Selections
You can access the transmit power LCD selections by rotating the
FUNCTION SELECT control on the LCD panel to highlight the Tx tab on
the LCD.
Rotate the SELECT-R control clockwise to select |Tx Power×
and
increase a setting or counterclockwise to select |Tx PowerØ
and
decrease a setting.
Note: Pressing the SELECT-R control toggles the |Tx Power× LCD selection with the
|Tx PowerØ LCD selection.
LCD Selection Description Settings
|Tx Power×
Increases the transmit power level and the
corresponding acoustic pressure delivered
through the transducer to the patient.
0 dB to –20 dB or
100% to 10%
|Tx PowerØ
Decreases the transmit power level and
the corresponding acoustic pressure
delivered through the transducer to
the patient.
0 dB to –24 dB or
100% to 6%
To Next Page
Loading...
