4 S y stem Setup
4 - 16 [ 1 ] I N S T R U C T I O N S F O R U S E
Adjusting Controls on the LCD
0
LCD panel.
To adjust the brightness or contrast control for the LCD:
1. Press the LCD CONTROL.
The system displays a screen for adjusting the contrast or brightness.
Bar graphs represent the contrast and the brightness values.
2. Rotate the SELECT-L control clockwise to increase or counterclockwise
to decrease the display contrast.
The bar graph for the contrast value corresponds to the adjusted value.
3. Rotate the SELECT-R control clockwise to increase or counterclockwise
to decrease the brightness.
The bar graph for the brightness value corresponds to the adjusted value.
Audio Volume
The VOLUME control located at the bottom of the LCD panel adjusts the
sound of the speakers.
To adjust the volume:
Turn the VOLUME control clockwise to increase or counterclockwise to
decrease the audio output.
1 Select-R
2 LCD control
3 Select-L
4 Volume
To Next Page
Loading...
