3 S ystem C ontrols
3 - 60 [ 1 ] I N S T R U C T I O N S F O R U S E
Maintenance Dialog
Box Selection
Description
ASE 16 – 5 Scores
ASE 17 – 5 Scores
1
Configures the system to display the indicated type of WMS graphics
(16-segment or 17-segment).
Configures the system to display the following WMS scores for assignment:
X – Cannot evaluate
1 – Normal
2 – Hypokinetic
3 – Akinetic
4 – Dyskinetic
5 – Aneurysmal
ASE 16 – 7 Scores
ASE 17—7 Scores
1
Configures the system to display the indicated type of WMS graphics
(16-segment or 17-segment).
Configures the system to display the following WMS scores for assignment:
X – Cannot evaluate
1 – Normal
2 – Hypokinetic
3 – Akinetic
4 – Dyskinetic
5 – Aneurysmal
6 – Akinetic with scar
7 – Dyskinetic with scar
Print colored
Prints the report in color when checked.
LV Trace Line
Solid Line
Configures the system to display a solid line when you create an LV trace.
Dashed Line
Configures the system to display a dashed line when you create an LV trace.
Printer
Displays the printer setup dialog box.
QT – Time Table
Heartrate
Allows you to enter a heart rate. When a heart rate and systolic duration are both
entered, you can add this pair of values to the QT – Time Table.
Syst. Duration
Allows you to enter a systolic duration. When a heart rate and systolic duration are
both entered, you can add this pair of values to the QT – Time Table.
Factory Settings
Applies factory defaults for systolic durations and heart rates.
Update
Adds the entered heart rate and systolic duration to the QT – Time Table.
Delete
Removes the selected heart rate and systolic duration pair from the
QT – Time Table.
Save
Saves changes.
Protocol Editor
Displays the Protocol Editor dialog box.
Quit
Exits the Maintenance dialog box.
1
Requires software version 2.0 or higher
To Next Page
Loading...
