4 S y stem Setup
4 - 26 [ 1 ] I N S T R U C T I O N S F O R U S E
Input/output panel connections.
1 B/W Printer Out
2 Printer control connections (remote control 1,
remote control 2)
3 Color Printer Out (RGB)
4 Serial Port 1
5 Audio Out
6 Audio In
7 Color In (S-Video)
8 Color In (BNC)
9 Video Impedance Control
10 Color Printer Out (S-Video)
11 Color Printer Out (BNC)
The impedance of the video input to the ultrasound system must be matched
to the output impedance of the peripheral device using the video impedance
control. Standard video devices have an output impedance of 75 ohms, so the
video impedance control is normally set to the 75-ohm position.
To Next Page
Loading...
