TC35i AT Command Set
7.10 AT^SHUP
s
m
obil
e
TC35i_ATC_V02.07 Page 157 of 439 1/30/04
Confidential / Released
call number
The "call number" is an optional index into the list of current calls available via
AT+CLCC. AT command AT^SHUP
will terminate the call identified by the specified call number. The default call number "0" is not assigned to any
call, but signifies "all calls". As "0" is the default value, it may be omitted.
With
AT^SHUP, Calls will be terminated regardless of their current call status, which may be any of the states
allowed by
AT+CLCC.
[0] terminate all known calls
1...7 terminate the specific call number
<cn>
Notes
• it depends on the network whether or not a delivered release cause will be forwarded to the remote party.
•With
AT^SHUP, Calls will be terminated regardless of their current call status, which may be any of the states
allowed by
AT+CLCC.
<cn>
(num)
To Next Page
Loading...
Need help?
General
