TC35i AT Command Set
14.3 AT+CPBS
s
m
obil
e
TC35i_ATC_V02.07 Page 348 of 439 1/30/04
Confidential / Released
The write command selects the phonebook memory <storage>, which is used by other phonebook commands.
Parameter Description
For phonebooks "MC", "RC" and "LD", automatic deletion of the entries stored in ME will be performed if the SIM
card is changed. If the same SIM is removed and reinserted, no automatic deletion is performed. Calls made
after last switchon will be lost from "MC", "RC" and "LD" phonebook, if the SIM is removed and reinserted during
normal operation.
“FD“ Fixed dialling phonebook
capacity: depending on SIM card
location: SIM
“SM“
(&F)
SIM phonebook
capacity: depending on SIM card
location: SIM
“ON“ MSISDN list
capacity: depending on SIM card
location: SIM
“ME“ Mobile Equipment Phonebook
capacity: max. 250 entries
location: ME
“LD“ last number dialled phonebook. Stores all voice call numbers dialed with ATD,
but no data call numbers.
capacity: max. 10 entries
location: depending on SIM this phonebook may reside partly or completely in
ME
AT command +CPBW is not applicable to this storage. The LD list can be
deleted with
AT^SDLD or with AT^SPBD.
“MC“ missed (unanswered received) calls list
capacity: max. 10 entries
location: ME
+CPBW is not applicable to this storage. The MC list can be deleted with
AT^SPBD.
“RC“ received calls list
capacity: max. 10 entries
location: ME
+CPBW is not applicable to this storage. The RC list can be deleted with
AT^SPBD.
value indicating the number of used locations in selected memory storage.
value indicating the maximum number of locations allowed in the selected memory storage.
Note
• We recommend to take advantage of the "^SSIM READY" URC. If enabled with AT^SSET, this URC acknowl-
edges to the user that SIM data is accessible after SIM PIN authentication. It will be delivered once the ME
has completed reading data from the SIM card.
<storage>
(str)
<used>
(num)
<total>
(num)
To Next Page
Loading...
Need help?
General
