TC35i AT Command Set
2.14 AT^SCFG
s
m
obil
e
TC35i_ATC_V02.07 Page 57 of 439 1/30/04
Confidential / Released
Examples
EXAMPLE 1
Enable sending of a short message (SMS) on next DTR activation (OFF-ON transition). Sent SMS is
assumed to be stored at first location of storage selected with
AT+CPMS and AT^SSMSS, i.e. SMS may be
sent from either SIM or ME storage.
Also refer to
AT+CMSS and AT+CMGW. Since SMS transmission and ongoing calls are possible at the same
time there is no need to wait until all calls have ended. (
<AutoExecMode>=0).
If a DTR activation has occured the ME issues the URC "
^SCFG: " followed by the response of the executed
command; the message reference in this case:
EXAMPLE 2
Perform a reset with the TC35i periodically after 10 hours, but wait for all calls have ended.
For details regarding software controlled power down refer to
AT+CFUN and AT^SMSO.
After ten hours:
AT+CMGF=1
Enable SMS text mode
OK
AT+CNMI=1,1
Enable "+CMTI:" URC on any received SMS
OK
AT+CMGD=1
Delete first SMS location
OK
AT+CMGW="01522400045",145
Store an SMS with
>Test-SMS to be sent from storage!
text entry (finish with CTRL-Z)
+CMGW: 1
SMS confirmed to be stored at first location
OK
AT^SCFG="AutoExec",1,0,0,0,"AT+CMSS=1"
Enable execution on next DTR activation
^SCFG: "AutoExec","1","0","0","0","at+cmss=1"
^SCFG: "AutoExec","0","1","0","0","","000:00:00","000:00:00"
^SCFG: "AutoExec","0","1","1","0","","000:00:00","000:00:00"
^SCFG: "AutoExec","0","1","2","0","","000:00:00","000:00:00"
OK
^SCFG:"AutoExec",0,0,1,0,"AT+CMSS=1"
OK
"AT+CMSS=1" command entry confirmation
+CMSS: 16
AT^SCFG="AutoExec",1,1,2,5,"AT+CFUN=0,1","010:00:00"
...
OK
^SCFG:"AutoExec",1,1,2,5,"AT+CFUN=0,1"
OK
"AT+CFUN=0,1" command entry confirmation
SYSSTART
TC35i has restarted
To Next Page
Loading...
Need help?
General
