Maintenance PC
73
Building Technologies A6V10257473_b_en_--.doc
Fire Safety & Security Products 01.2010
18 Maintenance PC
A PC can be connected with the XC10xx-A equipment to carry out the following
operations:
- Programming upload / download
- Event memory upload / download
- Alarm counter reset
- Recording / printing of programming and event memory
Hardware requirement and installation
- MCL-USB (FDUZ221) adaptor to connect between the PC (USB port) and
connector X21 of board XCM1002 (follow installation instructions of the drivers
delivered with the product)
- XC10 Tool software (to download from Intranet)
To Next Page
Loading...
Need help?
General
