Safety instructions
9
Building Technologies A6V10257473_b_en_--.doc
Fire Safety & Security Products 01.2010
2 Safety instructions
2.1 Danger levels
The following pictograms indicate the possible danger levels, their severity and
consequences.
DANGER
Imminent danger!
Serious injuries or death.
WARNING
Potentially dangerous situation
Serious injuries or death.
CAUTION
Potentially dangerous situation
Light injuries or material damage.
NOTE
Important information requiring special attention.
2.2 Safety instructions
Products are developed and manufactured in accordance with the applicable
international and European security standards.
The local rules of installation, exploitation and destruction of the product apply and
must be respected just like the safety instructions which appear in the
documentation of the product.
Electric installations
CAUTION
Interventions on wiring should be carried out only by qualified personnel.
CAUTION
Respect the safety instructions in explosive zone.
Hardware must not be powered during commissioning and maintenance
Affix an external label “DANGER external voltage” on the terminals connected to
an external voltage source
Separately lay the power lines towards the control unit. They must be fitted with
their own, clearly identified fuses
Ground in accordance with the local security standards
Assembly, installation, commissioning and maintenance
If any tools or accessories such as ladders are required, safe and suitable
devices must be used
When the extinguishing control panel is started up, it must be ensured that no
instable conditions can occur
Controls may only be set to normal function when the product operability has
been completely tested and the system has been handed over to the customer.
Control release for testing should not damage the installation
To Next Page
Loading...
Need help?
General
