SIGLENT SDS1102CML - General Features and Specifications; General Features

SIGLENT
SDS1000CML/CNL/DL Service Manual 1
General Features and Specifications
General Features
SDS1000CML/CNL/DL series oscilloscope is two-channel instrument in small,
lightweight, benchtop chassis that you can use to take ground-referenced
measurements.
Table 1-1 General features
Model Channels
Bandwidth Sampling Rate
Memory Depth
SDS1072CML
2 70MHz 1GSa/s 2Mpts(Depth memory
SDS1102CML
2 100MHz 1GSa/s 2Mpts(Depth memory
SDS1152CML
2 150MHz 1GSa/s 2Mpts(Depth memory)
SDS1072CNL
2 70MHz 1GSa/s 40Kpts
SDS1102CNL
2 100MHz 1GSa/s 40Kpts
SDS1022DL 2 25MHz 500MSa/s 32Kpts
SDS1052DL 2 50MHz 500MSa/s 32Kpts
SDS1102DL 2 100MHz 500MSa/s 32Kpts
SDS1202DL 2 200MHz 500MSa/s 32Kpts
 The volume of the oscilloscope is cabinet and it is portable.
 7” Color TFT LCD display.
 2 channels, Bandwidth: 25MHz ~200 MHz.
 Single real-time sampling rate are: 500MSa/s(SDS1000DL); 1Gsa/s
(SDS1000CML /CNL); Equivalent sampling rate is 50GSa/s.
 Trigger types: Edge, Pulse, Video，Slope and Alternative.
 Unique Digital Filter function and Waveform recorder function.
 Auto measure thirty two parameters and support all measurement function.
 Two groups’ reference waveforms and twenty groups’ capture waveforms
and twenty groups’ setups internal save/recall function and USB flash drive
save/recall function.
 Cursor types: Manual mode, Track mode and Auto mode.
 Channel waveform and its FFT waveform display on split screen.