Silvercrest SSMGR 600 A1 - Filling the Blender Jug While the Blender Is Running; General Tips on Using the Blender; Removing the Blender Jug from the Motor Unit; Switching on; Selecting Speed

SilverCrest SSMGR 600 A1
38 - English
9.3 Switching on / selecting speed
You can only switch the blender on if the blender jug (4) is properly closed and correctly
seated on the motor unit (7) and the lid (2) is closed.
Select the desired speed using the rotary switch (5).
Level 1 to 3
For mixing, blending and puréeing liquid or semi-solid foods
Level 3 to 5
For chopping and for more solid foods
P
For crushing ice and for short bursts at high speed. Also for cleaning the cutting
blades.
The rotary switch (5) does not slot into place in this mode to ensure the motor
does not overload. So you should only ever use this function for very short times.
If you want to crush ice cubes, do not fill the blender jug (4) with ice cubes beyond approx. ¼
of the fill volume (you can also guess the quantity). Otherwise the ice will not be perfectly
crushed.
9.4 Filling the blender jug while the blender is running
WARNING!
• When the blender is running, only ever open the measuring cap (1) and not the entire
blender jug (4) lid (2). Otherwise rotating food could be catapulted out.
• When the measuring cap (1) is open, never insert cutlery or other items into the blender
jug (4). There is a danger of injury!
Proceed as follows to add ingredients while the blender is running:
1. Twist the measuring cap (1) anticlockwise and remove it.
2. Add the desired ingredients to the blender jug (4).
3. Close the measuring cap (1). To do this, place the measuring cap (1) into the lid (2) and twist
clockwise.
9.5 Removing the blender jug from the motor unit
1. Turn the rotary switch (5) to the “0” position. If you do not wish to continue using the blender,
disconnect the mains plug from the mains socket.
2. Wait for the motor to come to a stop.
3. Lift the blender jug (4) vertically off the motor unit (7).
9.6 General tips on using the blender
• If you wish to process solid ingredients, cut them into small pieces first (approx. 2 to 3 cm).
• To purée solid ingredients, gradually add small amounts into the blender jug (4) with the measuring
cap (1) open.
• If you wish to mix liquid ingredients, start with just a little liquid. Then gradually add small amounts of
liquid into the blender jug (4) with the measuring cap open (1).