SilverCrest SSMGR 600 A1
English - 35
• If liquid does penetrate into the casing of the motor block (7),
unplug the mains plug from the socket and contact customer
services. There is a risk of electric shock!
• Never touch the motor unit (7), the power cord or the mains plug
with wet hands. There is a risk of electric shock!
• Disconnect the blender from the mains immediately after use. The
device is only without electrical power if the mains plug is
disconnected. There is a risk of electric shock!
• Do not leave the blender unattended while it is running, so you
can react quickly in the event of hazards.
RISK of overheating and fire
• Only ever operate the blender with the blender jug (4) filled and
never empty.
• Do not use the device in direct sunlight or near heating devices
(heaters, stoves, ovens, etc.).
6. Copyright
All the contents of this user manual are protected by copyright and provided to the reader for information
only. Copying data and information without the prior explicit written consent of the author is strictly
forbidden. This also applies to any commercial use of the contents and information. All texts and diagrams
are up-to-date as of the date of printing. Subject to change without notice.
7. Before you start
Remove the blender and all accessories from the packaging and check that the package contents are
complete. Remove all packaging materials. Keep the packaging material away from children and dispose
of appropriately.
Before using it for the first time, clean the blender thoroughly as described in the chapter on ‘Cleaning’.
To Next Page
Loading...
