SilverCrest SSMGR 600 A1
34 - English
• If the power cable of this device is damaged, it must be replaced
by the manufacturer, its customer service or a similarly qualified
person, in order to avoid any possible danger.
• Never open the housing of the motor unit (7). It does not contain
any replaceable parts. Opening the housing can expose you to
the risk of electric shock.
• If you notice any smoke, unusual noises or strange smells,
immediately unplug the mains plug from the socket. If this occurs,
the blender should no longer be used until it has been inspected
by authorised service personnel. Never inhale smoke from a
possible device fire. If you do inadvertently inhale smoke, seek
medical attention. Inhaling smoke can be bad for your health,
there is a risk of injury!
• Make sure that the power cord cannot be damaged by sharp
edges or hot spots. Do not pinch or crush the power cord. Always
hold the power cord by the mains plug and never pull on the cord
itself. Always lay the power cord so it does not present a trip
hazard. There is a danger of injury!
• Always disconnect the device from the mains supply if it is left
unattended and before assembling, disassembling or cleaning, or
if there is a problem with the device. There is a risk of electric
shock!
Never immerse the motor unit (7) in water and do not allow
liquid to penetrate into the housing of the motor unit (7).
To Next Page
Loading...
