SilverCrest SSMGR 600 A1
English - 33
• Never insert cutlery or other stirring implements into the blender
jug (4) while the blender is running as the cutting blades rotate
very quickly and may cause considerable damage and injury.
• Be careful when handling the blender, emptying the blender jug
(4) and cleaning the device. The cutting blades are extremely
sharp.
• Always switch the blender off before removing the blender jug (4)
from the motor unit (7).
• Always switch the blender off and disconnect the mains plug from
the mains socket before changing accessories or touching parts
which move when in use.
• Always switch the blender off and wait for the motor to stop
before removing the blender jug (4) from the motor unit (7).
DANGER: Risk of electric shock
• Only connect the blender to a properly installed, easily accessible
mains socket whose mains voltage corresponds to that on the
rating plate. After connecting the device, the mains socket must still
be easily accessible so that you can remove the mains plug
quickly in the event of an emergency.
• Never operate the blender near a bath tub, a shower or a full sink.
• The power cord and the mains plug must not be damaged.
To Next Page
Loading...
