13.8 FCC Identifier: N2S-SC42E-235470
Silvus model #: SC4240E-235470-BB
Equipment Class: Digital Transmission System
The following parameters must be used to be compliant to the appropriate FCC requirements:
Antennas: 2.5dBi Omni Antennas (Silvus part# 1001-071)
Bandwidth: 10MHz
Maximum 10MHz Bandwidth Output Power @ Frequency #1: 891.25mW @ 4945MHz, 4950MHz,
4955MHz, 4960MHz, 4965MHz, 4970MHz
Maximum 10MHz Bandwidth Output Power @ Frequency #2: 955mW @ 4975MHz, 4980MHz, 4985MHz
13.9 FCC Identifier: N2S-SC44E-235470
Silvus model #: SC4480E-235470-SBST
Equipment Class: Digital Transmission System
The following parameters must be used to be compliant to the appropriate FCC requirements:
Antennas: 2.5dBi Omni Antennas (Silvus part# 1001-071)
Bandwidth: 10MHz
Maximum 10MHz Bandwidth Output Power @ Frequency #1: 912mW @ 4945MHz, 4950MHz, 4955MHz
Maximum 10MHz Bandwidth Output Power @ Frequency #2: 933.25mW @ 4960MHz, 4965MHz,
4970MHz
Maximum 10MHz Bandwidth Output Power @ Frequency #3: 912mW @ 4975MHz, 4980MHz, 4985MHz
13.10 Notes
This equipment has been tested and found to comply with the limits for a class B digital device pursuant
to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses and can radiate radio frequency
energy and if not installed and used in accordance with the instructions, may cause harmful interference
to radio communications. However, there is no guarantee that interference will not occur in a particular
To Next Page
Loading...
