14. Notes Regarding CE Mark (-206 models only)
The following Silvus Technologies models are declared to conform to CE Mark requirements:
Silvus P/N: SC4240-206-EB, SC4480-206-SBST, SC4240E-206-EB, SC4480E-206-SBST
SC4240E-206-BB
Relevant standards:
ETSI EN 302 064 V2.1.1 (2016-09), Wireless Video Links, Harmonized Standard
ETSI EN 301 489-1 V2.2.0 (2017-03), EMC, Common Technical Requirements
ETSI EN 301 489-28 V1.1.1 (2004-09), EMC, Specific conditions for wireless digital video links
EN 60950-1, Information Technology Equipment, Safety
Frequency range: 2025-2110 MHz
Maximum RF power: 500 mW per channel, up to a maximum EIRP of 1.6 watts for the SC4240-206-
EB, SC4240E-206-EB, SC4240E-206-BB and 3.2 watts for the SC4480-206-SBST,
SC4480E-206-SBST
Antenna: 2.15dBi Omni Antennas (AOV2D230515)
Cable: Silvus cable assembly (SC22-PRICBL02-6)
External Bandpass Filter:
Microwave Filter Co. model 3813
(a filter of equivalent performance may also be used, contact Silvus Technologies customer
support for more information)
AC Adapter (if used): EDAC Power Electronics EA10523C-120 (this adapter is approved for indoor use
only) (this adapter was certified by the manufacturer to IEC 60950-1)
External DC supply: If the customer provides DC power from their own source, the supply should be
fused for a 5-amp circuit.
Safe Working Distance:
Maintain safe working distance of minimum 20cm. For more details, refer to TUV report no.
SD72128709-0617A-0617C, “Radio Frequency Exposure Verification of the Silvus Technologies
Inc. StreamCaster SC420-206 and SC4480 Tactical MIMO Radio EN 62311 January 2008” (copy of
report available upon request). The CE Mark Technical File is available upon request for
inspection.
To satisfy RF exposure requirements, this device and its antennas must operate with a
separation distance of at least 20 cm from all persons and must not be co-located or operating
in conjunction with any other antenna or transmitter, except in accordance with RED RF
Exposure requirements.
To Next Page
