StreamCaster 4000 series MIMO Radio User Manual 9/2/20
10017C000 Silvus Technologies Confidential Page
5.1.2.5 Quality of Service (QoS) # QoS
Figure 32 Quality of Service (QoS) Configuration Page
Quality of Service Port Classification:
The Quality of Service configuration page allows the user to make a distinction between low and high
priority traffic transmitted through each radio. High priority traffic will always jump to the front of the
queue and bypass any awaiting low priority traffic. In instances where the link cannot support the amount
of data trying to be transmitted, low priority traffic may be completely shelved in order to ensure that the
high priority traffic gets through.
To specify Low/High priority traffic, the user needs to simply input the port number that the traffic will be
arriving on. Multiple ports of the same priority can be separated by a comma (i.e. 5001, 6001, 6002).
Alternatively, the user can specify a range of ports using a dash (i.e. 5001-5006). Any combination of
commas and dashes will work as well (i.e. 5001, 6001-6007, 8000). Any field can be cleared by removing
the text and clicking ‘Apply’ or ‘Save and Apply’. If unspecified, traffic is treated as Low Priority.
To Next Page
Loading...
