StreamCaster 4000 series MIMO Radio User Manual 9/2/20
10017C000 Silvus Technologies Confidential Page
5.2.5 Per-Node Setup
The per-node setup can be used to modify key parameters of individual nodes within the network. As
shown in Figure 59 Per-Node Setup, users will see a list of all nodes available within the network. The
directly connected node is listed first with the rest ordered lexically. From here, users can click on an
individual node and modify its parameters. Any parameters changed from this interface can either be
applied or saved and applied.
Figure 59 Per-Node Setup
To Next Page
Loading...
