A-1
This appendix lists and explains the following:
• System Options.
• Software Point Types. 4010 point types are grouped into two general
categories:
- Monitor point types are used with monitoring devices, such as smoke
detectors, pull stations, heat detectors, fire pump monitors, etc.
- Control point types are used with signal (notification appliance) and
relay devices.
This appendix discusses the following topics:
Topic See Page #
System Options A-2
Point Types A-4
Appendix A
System Options and Point Types
Introduction
In this Chapter
Technical Manuals Online! - http://www.tech-man.com
To Next Page
Loading...
