To Next Page

To Previous Page

1-1

This document addresses the following:

• It provides programming examples for common 4010 system applications.

• It describes the specifications, limitations, and capacities of the 4010’s

Custom Control system. Although the 4010 will meet a wide range of

project requirements, 4020 or 4100 systems are best used in more complex

situations where the listed capacities of the 4010 are approached.

• It provides reference information concerning the 4010’s system options and

point types. In many cases, the built-in application programming provided

by these system components can be used in place of Custom Control.

Additional information related to 4010 Version 2.x can be found in the

following documents:

574-052....... 4010 Installation, Operation, and Front Panel Programming

Instructions

574-779....... 4010 SFIO Programmed IC Installation Instructions

574-499....... 4010 SFIO Board Installation Instructions

574-181....... 4009 IDNet NAC Extender Installation Instructions

574-182....... 4009 Fiber Optic Link Option Installation Instructions

574-325....... 4009-9807 NAC Option Card Installation Instructions

574-326....... 4009-9808 NAC Class A Adapter Option Card Installation

Instructions

Refer to the following page for specific information on a topic.

Topic See Page #

Before You Begin 1-2

QuickAlert Class A / Class B Guidelines 1-3

Chapter 1

Overview

Simplex 4010 Applications Manual

Other manuals for Simplex 4010