Simplex 4010 Applications Manual

v
Chapter 1. Overview
Overview................................................................................................... 1-1
Related Documentation............................................................................. 1-1
In this Chapter........................................................................................... 1-1
Before You Begin .........................................................................................1-2
Introduction............................................................................................... 1-2
Custom Control Capacities ....................................................................... 1-2
Understand the Details of the Intended Application ................................. 1-2
Understand the Built-in Functionality Provided by System Options and
Point Types ............................................................................................... 1-2
QuickAlert Class A / Class B Guidelines ..................................................... 1-3
Overview................................................................................................... 1-3
Class A QuickAlert................................................................................... 1-3
Class B QuickAlert ................................................................................... 1-4
Chapter 2. Selective Signaling Applications
Overview................................................................................................... 2-1
In this Chapter........................................................................................... 2-1
Selective Signaling by Floor......................................................................... 2-2
Overview................................................................................................... 2-2
Step 1. Define NAC’s Device Type, Point Type, and Custom Label ...... 2-2
Step 2. Assign Device Types, Point Types, and Custom Labels to
Initiating Devices ........................................................................ 2-3
Step 3. Add Appropriate NACs to List L6 (Off On Silence)................... 2-3
Step 4: Add Appropriate NACs to List L7 (Off on Reset)....................... 2-4
Step 5. Add Floor’s Initiating Devices to a User-Defined List................ 2-4
Step 6. Add Custom Control Equations................................................... 2-4
Selective Signaling by Area.......................................................................... 2-7
Overview................................................................................................... 2-7
Step 1. Define NAC’s Device Types / Point Types / Custom Labels ...... 2-7
Step 2. Assign Device Types, Point Types, and Custom Labels to
Initiating Devices ........................................................................ 2-8
Step 3. Add Appropriate NACs to List L6 (Off On Silence)................... 2-8
Step 4: Add Appropriate NACs to List L7 (Off On Reset)...................... 2-9
Step 5. Add Area’s Initiating Devices to a User-Defined List................. 2-9
Step 6. Add Custom Control Equations................................................... 2-9
Selective Signaling by Fire Floor, Floor Above, and Floor Below............. 2-12
Overview................................................................................................. 2-12
Step 1. Define NAC’s Device Types / Point Types / Custom Label...... 2-12
Step 2. Define Device Types, Point Types, and Custom Labels for
Initiating Devices ...................................................................... 2-13
Step 3. Add Appropriate NACs to List L6 (Off On Silence)................. 2-13
Step 4: Add Appropriate NACs to List L7 (Off On Reset).................... 2-14
Step 5. Add Each Floor’s Initiating Devices to a User-Defined List .... 2-14
Step 6. Add NACs to User-Defined Lists ............................................. 2-14
Step 7. Add Custom Control Equations................................................. 2-14
Selective Bypass of NAC/Relay Circuits.................................................... 2-17
Overview................................................................................................. 2-17
Step 1. Define Switch Attributes............................................................ 2-17
Table of Contents
Technical Manuals Online! - http://www.tech-man.com

Simplex 4010 Specifications

General

Brand	Simplex
Model	4010
Category	Fire Alarms
Language	English