Simplex 4100 Service Instructions

fB3 ti4
Ti31 I%
TEi5 P7
TB2 P6
TB4
Figure 6
Style D (Class A) Master Motherboard
Connectors
P4 = Master Trouble Output and City Circuit input.
l Connects to P4 on Master Controller Board
P5 = Master Monitor Zone inputs (ZN 1 thru 8).
l Connects to P5 on the Master Controller Board.
P6 = Master Auxiliary Relay outputs (AUX 1 and 2).
l Connects to P6 on the Master Controller Board.
P7 = Master Signal Circuit inputs (SIG 1 and 2).
l Connects to P7 on the Master Controller Board.
Terminal Blocks
Style B Master Motherboard Terminal Blocks:
l TBl = ZNl thru ZN8
l TB2 = SIG1 AND SIG2
l TB3 = Master TBL and City Circuits
l TB4 = Master AUX Relay and Feedback Circuits.
Style D Master Motherboard Terminal Blocks:
l TBl = ZNl thru ZN4
l TB5 = ZN5 thru ZN8
l TB2 = SIG1 and SIG2
l TB3 = Master TBL and City Circuits
l TB4 = Master AUX Relay and Feedback Circuits.
10
firealarmresources.com

Simplex 4100 Specifications

General

Type	Fire Alarm Control Panel
Manufacturer	Simplex
Model	4100
Network Capability	Yes
Addressable	Yes
Power Supply	120/240 VAC, 50/60 Hz
Display	LCD
Annunciator Support	Yes
Battery Backup	Yes
Releasing Capability	Yes
Max Devices	Depends on configuration
Max Notification Appliance Circuits (NAC)	Varies with configuration
Max Releasing Circuits	Varies with configuration
Max Remote Annunciators	Varies with configuration
Communication Ports	Multiple
Operating Temperature	32°F to 120°F (0°C to 49°C)
Humidity Range	Up to 93% RH, non-condensing
NAC Outputs	4 (expandable)
Networking	Yes