Simplex 4100 Service Instructions

MAPNET@ POWER SUPPLY/MOTHERBOARD (562-974)
The 562-974 board (Figure 15) acts as a motherboard for a 562-976 MAPNET II@ Interface (Transceiver) board (with
standard 4100 power and communication signals), and provides isolated 36VDC power to drive MAPNET@ lines.
JW2
Jl J2 JWl
I
0 ”
0
I :
[--
l +
.
\
TBl
/
P2
I
Pl
\ I I
P3 R2 P4
Figure 15
MAPNET@ Power Supply/Motherboard
Output Power Specifications
Isolated +36 VDC (+5%, -7%) @ up to 500 mA.
Labeling
Silk-screened custom terminal wiring identifiers and glued-on card address label.
l Address label tells how to configure the daughter card’s address switches.
Connectors and Connector Sockets (Figure 15)
Pl, P2, P3, Jl, and J2
l Identical in function to their counterparts on Class A (Style D) or Class B (Style B) motherboards.
P4 = 3-pin connector for 733-523 harness. Connects to PlO, Pli, P12, or P13 on Master Power Supply board, or
to P4, P5, P6, or P7 on Expansion Power Supply board. Supplies power needed to operate +36VDC
MAPNET@ lines.
l P4-1 = +24VDC.
l P4-2 = 24VDC COMMON.
l P4-3 = Unused.
24
firealarmresources.com

Simplex 4100 Specifications

General

Type	Fire Alarm Control Panel
Manufacturer	Simplex
Model	4100
Network Capability	Yes
Addressable	Yes
Power Supply	120/240 VAC, 50/60 Hz
Display	LCD
Annunciator Support	Yes
Battery Backup	Yes
Releasing Capability	Yes
Max Devices	Depends on configuration
Max Notification Appliance Circuits (NAC)	Varies with configuration
Max Releasing Circuits	Varies with configuration
Max Remote Annunciators	Varies with configuration
Communication Ports	Multiple
Operating Temperature	32°F to 120°F (0°C to 49°C)
Humidity Range	Up to 93% RH, non-condensing
NAC Outputs	4 (expandable)
Networking	Yes