Simplex 4100 Service Instructions

TBl
JllJ2
LED1
J9/JlO
J7lJ8
TB2
/
I I
I I 1
I
I I
I
I I
P4
P5 P6 P3 Pl P2
J5/J6 J3lJ4
F4 Fl
F2 F3
Figure 32
8-Amp Expansion Power Supply
Terminals
TBl-1 and TBl-3 = 24VDC output from Fuse Fl (Fuse F4 on 565-079 boards).
TBl-5 and TBl-7 = 24VDC output from Fuse F2 (not used on 565-079 boards).
TBl-2, -4, -6 and -8 = 24VDC COMMON.
TBl-9 = PMSI. Normally OV (etch-connected to P3-1).
TBl-10 = Switch to battery. Normally +24V. OV when batteries are called for.
TBl-11 = + BATTERY.
TBl-12 = BATTERY.
5-AMP EXPANSION POWER SUPPLY (562-827)
Features and Functions
Can deliver either filtered or regulated 24VDC power.
l For regulated power, an external regulator must harness-connect to the power supply.
Provides two outputs, each fused at 5 Amps.
l Although each output can deliver up to 4 Amps of 24VDC, the power supply’s totaloutput cannot exceed 5 Amps.
Supervised for battery connection, fuses, AC power presence, brownout, and overvoltage (regulated version only).
53
firealarmresources.com

Simplex 4100 Specifications

General

Type	Fire Alarm Control Panel
Manufacturer	Simplex
Model	4100
Network Capability	Yes
Addressable	Yes
Power Supply	120/240 VAC, 50/60 Hz
Display	LCD
Annunciator Support	Yes
Battery Backup	Yes
Releasing Capability	Yes
Max Devices	Depends on configuration
Max Notification Appliance Circuits (NAC)	Varies with configuration
Max Releasing Circuits	Varies with configuration
Max Remote Annunciators	Varies with configuration
Communication Ports	Multiple
Operating Temperature	32°F to 120°F (0°C to 49°C)
Humidity Range	Up to 93% RH, non-condensing
NAC Outputs	4 (expandable)
Networking	Yes