System Description
20222121A 9
autopilot data, mode keys and course adjust keys. It has two
Robnet2 connectors for system interconnection and expansion
and two SimNet connectors for control and data sharing with
other Simrad products. A NMEA2000 Adapter Cable is available
for interface through a SimNet port (page 84).
1.5 Autopilot Computer
The autopilot computer is the heart in the AP16 autopilot system.
It contains the steering computer, interface to other system
components, and interface to Volvo Penta IPS system.
1.6 Heading Sensors
The AP16 autopilot must be used with the Simrad RC36 Rate
compass.
The RC36 is a fluxgate compass with integrated rate sensor. It
provides a dramatic improvement to the dynamic performance of
both the autopilot and a stabilized radar display.
1.7 Optional equipment
A series of options are available for the basic AP16 system.
R3000X Remote Control
A small handheld remote control with two push buttons for
power steering or course selection (port and starboard), and one
push button with built-in lighted indicator for limited mode
change.
JS10 Joystick
The JS10 Joystick is a Non-Follow-Up steering lever designed
for indoor and outdoor console mount. It has a spring-loaded
return-to-mid-position feature and is equipped with 10 m (33’) of
cable and installation hardware.
Multiple stations
Multiple control units can be added to the system.
To Next Page
Loading...
Need help?
General
