Simrad AP16 Autopilot
26 20222121A
The "locked" control units in the system will show:
The “Lock function is disengaged by one of the following
actions:
− The active control unit unlocks the other ones and makes
them “inactive” by another double press on the STBY
button. It also displays the
icon before it returns to the
normal active state.
− The system is switched OFF by any
control unit (press
STBY for 2-3 seconds).
2.17 User Set-up Menu
In the AP16, all modes except NFU have a complemental
User Set-up menu. You can easily access the set-up menu
by a quick double press on the INFO/SETUP button.
INFO
SE
SETUP
INF
Quick double press
to access
1
1
Scroll through the menu
10
10
Change a value or
setting
Alternating Course Knob Icon
When the PORT 10 and STBD 10 buttons are used in the
User Set-up menu, an icon will alternate with the mode
index to tell that no course changes can be made unless you
press the mode button.
The user set-up menu times out 30 seconds after the last
operation in the menu.
STANDBY Mode
Backlight
To Next Page
Loading...
Need help?
General
