Configuration and setup
20222121A 59
Language selection
To access the language selection in the Installation Menu,
confirm “Yes” by pressing the STBD 10 button.
The AP16 can present the display text in eight different
languages:
English, Deutsch, Francais, Espanol, Italiano, Nederlands,
Svenska and Norsk.
Press the STBD 10 or PORT 10
buttons to select language.
Continue to next item in the menu
by pressing the STBD 1 button, or
leave the menu by pressing the
STBY button.
4.4 Interface Settings
Sets the format of the clock/data output for radars connected to
the Autopilot Computer.
Step to the Interface part of the
Installation Menu.
Press the STBD 10 button to
access the Interface Setup items.
Use the PORT 10 or STBD 10
buttons to select the connected
type of radar.
4.5 Display units
Select Display units by pressing
STBD 1 button and confirm by
pressing the STBY 10 button. The
setup is local to each control unit.
This screen gives access to the
display unit set-up of the Wind
Speed, Sea temperature and