Simrad AP16 Autopilot
18 20222121A
To toggle between LO and HI parameters, press the "AUTO"
button two times quickly.
A
AUTO
Quick
double
press
Notes !
1. If you are in NAV or NoDrift modes you need not
enter
AUTO mode to manually change the parameter set. Just
make a quick double press on the AUTO button.
2. The manually selected setting (HI or LO) will override the
automatic selection and remain in effect until you re-enter
any automatic mode from STBY.
2.9 U-turn
This feature is very useful in a man overboard situation and
whenever you want to steer back on a reciprocal heading. It only
applies to power boats.
U-Turn changes the current set course to be 180 degrees in the
opposite direction. The user must decide whether the U-Turn
should be made to Port or Starboard when bringing the boat on
the new course. U-Turn is activated by a quick press on the
TURN/DODGE button. The AP16 will continue on the set
course until you press either the PORT or STBD button to select
the direction to make the U-Turn. If you do not press PORT or
STBD within 1 minute, the AP16 will return to the AUTO mode
and stay on course.
DODGE
TURN
Press
TURN/DODGE
to enter TURN
mode
1
Select
STBD
U-turn
Boat
makes
STBD
U-turn
To Next Page
Loading...
Need help?
General
