Simrad AP16 Autopilot
32 20222121A
2.18 INFO menu
A number of instrument pages are available under each mode
screen if the required information is available on SimNet (see
page 73). The INFO menu is accessed by a single press on the
INFO/SETUP button (not necessary if the unit is inactive).
The top of the screen will show the following information
depending on the active m
ode:
STANDBY mode
Heading
AUTO mode
Set course
HI/LO parameter
Heading
NAV mode
HI/LO parameter
Cross Track Error
NoDrift mode
Set course
HI/LO parameter
Heading
Step through the available instrument screens by pressing the
PORT or STBD button.
Depth/Speed
Depth
Speed through water
Speed Over Ground
Apparent wind
Wind angle
Wind Speed
Rudder angle