Simrad AP16 Autopilot
14 20222121A
Flashing course knob icon
When the PORT and STBD buttons are is used for settings
etc., an icon will flash on the screen to tell that no course
changes can be made unless you press the AUTO button.
Alarms
In the event there is an audible alarm with explaining text on the
control unit, refer to section 6 Trouble shooting.
2.3 Non-Follow-Up steering (NFU)
In Standby mode, the NFU display is presented when the PORT
or STBD button is pressed. The rudder will move as long as the
button is pressed and the rudder angle is shown on the display.
1
1
Activates
PORT rudder
command
Activates
STBD
rudder
command
To Next Page
Loading...
Need help?
General
