Simrad ce32 mkii - Page 43

0LACECURSORONTHEROUTELEGORWAYPOINTYOUWISHTO
EDITANDOPENFOREDITING
0RESS [CLR] TOABANDON).&/WINDOWS
7ITHCURSORPLACEDONAWAYPOINT the INFO window
(called forward by [ENT], [GOTO]) will inform of which
options are available for editing of the waypoint.
Changing the position of a waypoint will also update
the WPlist with the new position. Deleting a waypoint
from a route will not delete the waypoint from the WP-
list.
7ITHCURSORPLACEDONALEGOFAROUTE the INFO win-
dow (called forward by [ENT], [GOTO]) will inform of
which options are available for editing of the route.
You can insert a new waypoint between two existing
waypoints by moving the cursor to the desired location
(rubberbanding), and then press [PLOT], [ENT] to insert
it in the route.
You can delete a total route with its waypoints, if they
are not used in other routes, or you can delete just the
route lines and keep all the waypoints in the WPlist,
and their symbols will stay on the screen.
In case this INFO window appears on the screen, it’s
because the cursor is not placed on the exact right spot.
Move the cursor slightly, and try pressing [ENT] again.
If you want to place it on a waypoint symbol which is
part of a route, make sure the cursor does not touch any
of the route lines, as it otherwise will be the INFO win-
dow for the route and not the waypoint which is called
forward.
ENT
WP966 found.
Move: cursor
+ GOTO
Edit: GOTO
Delete from
route: CLR
Exit: MENU
Route 5.04
Insert WP:
cursor + PLOT
Delete route:
CLR
Exit: MENU
110nm
1:6600000
Cursor is not
placed on WP
or route.
Move cursor
and try again.
CLR
#%-+))7AYPOINTSANDNAVIGATION #HAPTER
43