To Next Page

To Previous Page

The 70CIRCLEALARMforms a circle around each way-

point, and the alarm distance can be set to anywhere be-

tween 0.01 to 9.99nm. The waypoint alarm will be acti-

vated when you reach the circle or the perpendicular

line - 70LINEALARM - crossing through the waypoint.

The alarm will not be activated if ’Auto waypoint shift’

is selected.

The 84%DISTANCEALARM forms a corridor along the

ideal track. When touching one of the boundaries the

XTE alarm will be activated. The alarm distance can

be set to anywhere between 0.01 to 9.99nm.

This value may be overwritten if the legs in a route

have been specified with different values.

!NCHORALARM When setting the anchor it is possible

to set up an alarm at the same time, so you will be

warned in case you drift too far from the anchored posi-

tion. The alarm distance can be set to anywhere from

0.01 to 9.99nm:

,OADDISPLAYFOR.AVIGATIONSETUP

'OTOANDSETTHE!NCHORALARMTO/.

'OTOANDINSERTALARMDISTANCE

#ONFIRMENTRY

#ALLUPTHEANCHORGUARDDISPLAY

-this display will provide an impression of the vessel’s

position in relation to the alarm circle.

70CIRCLE

LINE

84%

LIMIT

MENU 4,2

+/-

0-9

ENT

4,1MENU

#%-+))3ETUP #HAPTER

Simrad ce32 mkii User Manual

Questions and Answers: